AIM Sensor Car/bike linear suspension potentiometer 13

$459.00

AiM loggers can measure the displacement between two points using a sensor (linear potentiometer) directly connected to the points of measure. This potentiometer can measure linear displacements like:

 dampers compression or extension
 steering rotation measured through the rack displacement

When installing the sensor:

 be very careful avoiding possible bending of the internal cylinder; these bendings, occurring when over tightening the screws or in case of incorrect mounting, can seriously damage the sensor
 extract the internal cylinder for about 5 mm (0.2 inches) from the sensor lower boundary position. Please note: do not use this sensor to measure distances beyond the potentiometer maximum travel. The car/bike linear potentiometer can be connected to any analog channel of AiM loggers.

The drawing below shows sensors dimensions in millimetres [inches].

Car/Bike linear potentiometer technical characteristics are:

 Maximum supply voltage: 40 Vdc
 Resolution: essentially infinite
 Repeatability: ≤ 0.01 mm
 Operational speed: 10 m/s max
 Mechanical life: >25 millions cycles
 Temperature range: from -40° to +125°
 Environmental sealing: IP65
 Independent linearity: ≤±0.5%
 Cable type: Raychem 55A 24 AWG
 Cable length: 450 mm
 Housing: Aluminium
 Spherical bearing: Ø5 mm

More info refer to Datasheet

Length

50mm